Simulation of the Streamflow for the Rio Nuevo Watershed of Jamaica for Use in Agriculture Water Scarcity Planning
8
Citation
31
Reference
10
Related Paper
Citation Trend
Abstract:
Jamaica's water resources are under increasing risk of degradation and depletion, especially in light of increasing population growth, urbanization, and climate change. In this study, the soil and water assessment tool (SWAT) was used to simulate the hydrologic characteristics of the Rio Nuevo watershed in Jamaica to assess streamflow availability for irrigation supply during dry periods. Approximately 85% of the watershed consists of aquiclude rock material, thus resulting in low potential for interaction between surface and groundwater. Historical climatic data (precipitation and temperature) were obtained for the watershed, and streamflow data were obtained for the Rio Nuevo, which drains the watershed. The model was calibrated over the period 2002–2004, and validated using the period 2005–2007. This paper outlines the parameterization of SWAT for the Rio Nuevo watershed and describes the potential for its use in agricultural water scarcity management in Jamaica. A Nash-Sutcliffe efficiency (NSE) coefficient of 0.76 was obtained for calibration, whereas a coefficient of 0.50 was obtained for validation. Results indicate that in drought periods, the stream cannot supply the necessary water needed for the agricultural areas.Keywords:
SWAT model
SWAT model
Flood forecasting
Cite
Citations (184)
Land use and management practice inputs to the Soil and Water Assessment Tool (SWAT) are critical for evaluating the impact of land use change and best management practices on soil erosion and water quality in watersheds. We developed an algorithm in this study to maximize the usage of land use and management records during the setup of SWAT for a small experimental watershed in New Brunswick, Canada. In the algorithm, hydrologic response units (HRUs) were delineated based on field boundaries and associated with long-term field records. The SWAT model was further calibrated and validated with respect to water flow and sediment and nutrient (nitrate and soluble phosphorus) loadings at the watershed outlet. As a comparison, a baseline version of SWAT was also set up using the conventional way of HRU delineation with limited information on land use and management practices. These two versions of SWAT were compared with respect to input and output resolution and prediction accuracy of monthly and annual water flow and sediment and nutrient loadings. Results show that the SWAT set up with the new method had much higher accuracies in generating annual areas of crops, fertilizer application, tillage operation, flow diversion terraces (FDT), and grassed waterways in the watershed. Compared with the SWAT set up with the conventional method, the SWAT set up with the new method improved the accuracy of predicting monthly sediment loading due to a better representation of FDT in the watershed, and it also successfully estimated the spatial impact of FDT on soil erosion across the watershed. However, there was no definite increase in simulation accuracy in monthly water flow and nutrient loadings with high spatial and temporal management inputs, though monthly nutrient loading simulations were sensitive to management configuration. The annual examination also showed comparable simulation accuracy on water flow and nutrient loadings between the two models. These results indicate that SWAT, although set up with limited land use and management information, is able to provide comparable simulations of water quantity and quality at the watershed outlet, as long as the estimated land use and management practice data can reasonably represent the average land use and management condition of the watershed over the target simulation period.
SWAT model
Watershed Management
Cite
Citations (4)
SWAT model
Ponding
Paddy field
Cite
Citations (27)
Hydrological models have long been used to study the interactions between land, surface and groundwater systems, and to predict and manage water quantity and quality. The soil and water assessment tool (SWAT), a widely used hydrological model, can simulate various ecohydrological processes on land and subsequently route the water quality constituents through surface and subsurface waters. So far, in-stream solute transport algorithms of the SWAT model have only been minimally revised, even though it has been acknowledged that an improvement of in-stream process representation can contribute to better model performance with respect to water quality. In this study, we aim to incorporate a new and improved solute transport model into the SWAT model framework. The new process-based model was developed using in-stream process equations from two well established models—the One-dimensional Transport with Inflow and Storage model and the Enhanced Stream Water Quality Model. The modified SWAT model (Mir-SWAT) was tested for water quality predictions in a study watershed in Germany. Compared to the standard SWAT model, Mir-SWAT improved dissolved oxygen (DO) predictions by removing extreme low values of DO (<6 mg/L) simulated by SWAT. Phosphate concentration peaks were reduced during high flows and a better match of daily predicted and measured values was attained using the Mir-SWAT model (R2 = 0.17, NSE = −0.65, RSR = 1.29 with SWAT; R2 = 0.28, NSE = −0.04, RSR = 1.02 with Mir-SWAT). In addition, Mir-SWAT performed better than the SWAT model in terms of Chlorophyll-a content particularly during winter months, improving the NSE and RSR for monthly average Chl-a by 74 and 42%, respectively. With the new model improvements, we aim to increase confidence in the stream solute transport component of the model, improve the understanding of nutrient dynamics in the stream, and to extend the applicability of SWAT for reach-scale analysis and management.
SWAT model
Cite
Citations (11)