In 2018 we celebrated 25 years of development of radar altimetry, and the progress achieved by this methodology in the fields of global and coastal oceanography, hydrology, geodesy and cryospheric sciences. Many symbolic major events have celebrated these developments, e.g., in Venice, Italy, the 15th (2006) and 20th (2012) years of progress and more recently, in 2018, in Ponta Delgada, Portugal, 25 Years of Progress in Radar Altimetry. On this latter occasion it was decided to collect contributions of scientists, engineers and managers involved in the worldwide altimetry community to depict the state of altimetry and propose recommendations for the altimetry of the future. This paper summarizes contributions and recommendations that were collected and provides guidance for future mission design, research activities, and sustainable operational radar altimetry data exploitation. Recommendations provided are fundamental for optimizing further scientific and operational advances of oceanographic observations by altimetry, including requirements for spatial and temporal resolution of altimetric measurements, their accuracy and continuity. There are also new challenges and new openings mentioned in the paper that are particularly crucial for observations at higher latitudes, for coastal oceanography, for cryospheric studies and for hydrology. The paper starts with a general introduction followed by a section on Earth System Science including Ocean Dynamics, Sea Level, the Coastal Ocean, Hydrology, the Cryosphere and Polar Oceans and the "Green" Ocean, extending the frontier from biogeochemistry to marine ecology. Applications are described in a subsequent section, which covers Operational Oceanography, Weather, Hurricane Wave and Wind Forecasting, Climate projection. Instruments' development and satellite missions' evolutions are described in a fourth section. A fifth section covers the key observations that altimeters provide and their potential complements, from other Earth observation measurements to in situ data. Section 6 identifies the data and methods and provides some accuracy and resolution requirements for the wet tropospheric correction, the orbit and other geodetic requirements, the Mean Sea Surface, Geoid and Mean Dynamic Topography, Calibration and Validation, data accuracy, data access and handling (including the DUACS system). Section 7 brings a transversal view on scales, integration, artificial intelligence, and capacity building (education and training). Section 8 reviews the programmatic issues followed by a conclusion.
Satellite altimeters have been producing, as of 1992, an amazing and historic record of sea level changes. As Europe moves into full operational altimetry, it has become imperative that the quality of these monitoring signals with their uncertainties should be controlled, fully and properly descripted, but also traced and connected to undisputable standards and units. Excellent quality is the foundation of these operational services of Europe in altimetry. In line with the above, the strategy of the Fiducial Reference Measurements for Altimetry (FRM4ALT) has been introduced to address and to achieve reliable, long-term, consistent, and undisputable satellite altimetry products for Earth observation and for sea-level change monitoring. FRM4ALT has been introduced and implemented by the European Space Agency in an effort to reach a uniform and absolute standardization for calibrating satellite altimeters. This paper examines the problem and the need behind the FRM4ALT principle to achieve an objective Earth observation. Secondly, it describes the expected FRM products and services which are to come into being out of this new observational strategy. Thirdly, it outlines the technology and the services required for reaching this goal. And finally, it elaborates upon the necessary resources, skills, partnerships, and facilities for establishing FRM standardization for altimetry.
Given the considerable range of applications within the European Union Copernicus system, sustained satellite altimetry missions are required to address operational, science and societal needs. This article describes the Copernicus Sentinel-6 mission that is designed to provide precision sea level, sea surface height, significant wave height, inland water heights and other products tailored to operational services in the ocean, climate, atmospheric and land Copernicus Services. Sentinel-6 provides enhanced continuity to the very stable time series of mean sea level measurements and ocean sea state started in 1992 by the TOPEX/Poseidon mission and follow-on Jason-1, Jason-2 and Jason-3 satellite missions. The mission is implemented through a unique international partnership with contributions from NASA, NOAA, ESA, EUMETSAT, and the European Union (EU). It includes two satellites that will fly sequentially (separated in time by 5 years). The first satellite, named Sentinel-6 Michael Freilich, launched from Vandenburg Air Force Base, USA on 21st November 2020. The satellite and payload elements are explained including required performance and their operation. The main payload is the Poseidon-4 dual frequency (C/Ku-band) nadir-pointing radar altimeter that uses an innovative interleaved mode. This enables radar data processing on two parallel chains the first provides synthetic aperture radar (SAR) processing in Ku-band to improve the received altimeter echoes through better along-track sampling and reduced measurement noise; the second provides a Low Resolution Mode that is fully backward-compatible with the historical reference altimetry measurements, allowing a complete inter-calibration between the state-of-the-art data and the historical record. A three-channel Advanced Microwave Radiometer for Climate (AMRC) provides measurements of atmospheric water vapour to mitigate degradation of the radar altimeter measurements. The main data products are explained and preliminary in-orbit Poseidon-4 altimeter data performance data are presented that demonstrate the altimeter to be performing within expectations.
This article describes the Copernicus Sentinel-6 satellite mission and early in-orbit results. The mission is designed to address the needs of the European Copernicus programme for precision sea level, near-real-time measurements of sea surface height, significant wave height, and other products tailored to operational services in the climate, ocean, meteorology and hydrology domains. It is designed to provide enhanced continuity to the very stable time series of mean sea level measurements and ocean sea state started in 1992 by the TOPEX/Poseidon (T/P) mission and follow-on Jason-1, Jason-2 and Jason-3 satellite missions. The mission is implemented through a unique international partnership with contributions from NASA, NOAA, ESA, EUMETSAT, and the European Union (EU). It includes two satellites that will fly sequentially (separated in time by 5 years). The first satellite, named Sentinel-6 Michael Freilich (S6-MF), launched from Vandenburg Air Force Base, USA on 21 st November 2020. The main payload is the Poseidon-4 dual frequency (C/Ku-band) nadir-pointing radar altimeter providing synthetic aperture radar (SAR) processing in Ku-band to improve the signal through better along-track sampling and reduced measurement noise. The altimeter has an innovative interleaved mode enabling radar data processing on two parallel chains, one with the SAR enhancements and the other furnishing a “Low Resolution Mode” that is fully backward-compatible with the historical TOPEX/Poseidon and Jason measurements, so that complete inter-calibration between the state-of-the-art data and the historical record can be assured. Early in-orbit performance data are presented.
